ESM B-25 Mitchell





Wing Span:95" (2420 mm)
Length:76.2" (1935 mm)
Wing area:7.82/sq.ft (77.6 sq. dm)
Wing Loading:42 oz/sq. ft (128 g/sq. dm)
Flying Weight:22.1 lbs (10 kg)
Radio:6ch & 13 servos
Gas Engine:2-17cc or 20 cc
Glow Engine:2-.91 2 cycle or 2 -1.20 4 cycle
Prop Recommendations: :3-blade is scale.
Servo Recommendations: :100 oz-sq-in minimum - HD-1501, Hitec 645MG, Hitec 5645MG, DS-8309TG

The ESM B-25 Mitchell, as with all of ESMís scale models, is loaded with features never before found in such low price ARF's, resulting in highly detailed, great looks, and great flying ARF's!

The detailed fuselage is poly resin fiberglass, with scale panel lines and rivets molded right in. Wings are typical built up construction, include pre-designed cavity's and mounting blocks for optional scale retracts, and have factory constructed flaps, all of which is then factory covered with an etched polyester film. All parts are finally expertly painted right at ESM's factory, and once dry, all scale decals are pre-applied, and are then covered with a factory clear coat for protection.

All ESM planes are painted with a very high quality enamel paint which is resistant to oil, grease, and fuels. The high gloss paints are of course easier to clean than the low gloss. These paints can be painted over for weathering and the like.

The ESM B-25 comes from the factory with conventional gear and wheels, and one of the more complete hardware packages anywhere...including screws, rods, fuel tanks, etc. ESM also offers a complete line of retracts for each individual plane, adding to the level of scale realism that all scale pilots look for in an ARF.


Add to Cart:

  • Model: ESMB25
  • 0 Units in Stock

This product was added to our catalog on Thursday 25 October, 2012.

Powered by Zen Cart - Site by AIO Web Services